| MQL与普通切削液加工方法的实验研究 |
| |
| 引用本文： | 王丽. MQL与普通切削液加工方法的实验研究[J]. 机床与液压, 2005, 50(7): 45-46,58 |
| |
| 作者姓名： | 王丽 |
| |
| 作者单位： | 西安工业学院机电工程学院,西安,710032 |
| |
| 摘 要： | 随着环境保护意识的提高，从降低加工成本和提高加工精度的需求出发，Minimal Quantity Lubrication(MQL)加工方法正被逐渐地研究与采用。通过实验并与普通切削油加工方法比较，MQL方法表现出其在刀具磨耗、切削阻抗、工件表面粗糙度影响方面比后者具有更优的物理与加工特性。
|
| 关 键 词： | MQL 切削 切削液 油膜 |
| 文章编号： | 1001-3881(2005)7-045-2 |
A Study of Minimal Quantity Lubrication Cutting in Comparison with Conventional Cutting with Flood Coolant Supply |
| |
| WANG Li. A Study of Minimal Quantity Lubrication Cutting in Comparison with Conventional Cutting with Flood Coolant Supply[J]. Machine Tool & Hydraulics, 2005, 50(7): 45-46,58 |
| |
| Authors: | WANG Li |
| |
| Abstract: | With the development of concerning of environment,Minimal quantity lubrication cutting has been studied and developed aiming at reducing processing cost and getting higher machining precision.This study shows that MQL cutting has equivalent or sometimes superior physical and cutting performance in comparison with the conventional cutting with flood coolant supply,such as in cutting-tool wear,cutting resistance and surface roughness. |
| |
| Keywords: | MQL Cutting Cutting fluid Mist flow |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
