| 利用圆度进行圆定位的方法 |
| |
| 引用本文： | 张之稳,宋世军.利用圆度进行圆定位的方法[J].山东大学学报(工学版),2006,36(1):19-22. |
| |
| 作者姓名： | 张之稳 宋世军 |
| |
| 作者单位： | 1. 山东大学,机械工程学院,山东,济南,250061
2. 山东建筑工程学院,机电工程学院,山东,济南,250014 |
| |
| 摘 要： | 提出了用圆度进行圆在图像中定位的方法，当圆度的阈值设为1时，只针对标准圆，当因客观原因使镜头与圆所在面不平行时，可以设置合适的圆度阈值，确定圆在图像中的位置，这是Hough变换做不到的.实验证明，此方法简单有效，具有很好的容忍性和鲁棒性.
|
| 关 键 词： | 圆检测 Hough变换 圆度 |
| 文章编号： | 1672-3961(2006)01-0019-04 |
| 收稿时间： | 2005-04-12 |
| 修稿时间： | 2005年4月12日 |
Circle locating method based on roundness |
| |
| ZHANG Zhi-wen,SONG Shi-jun.Circle locating method based on roundness[J].Journal of Shandong University of Technology,2006,36(1):19-22. |
| |
| Authors: | ZHANG Zhi-wen SONG Shi-jun |
| |
| Affiliation: | 1. School of Mechanical Engineering,Shandong University,Jinan 250061，China；2. School of Mechanical Engineering,Shandong Architecture Engineering Institute,Jinan 250014，China |
| |
| Abstract: | A circle locating method based on roundness is introduced.It is only suitable for standard circle when the threshold of roundness equals to 1.We can set appropriate threshod and locate the position of circle simplely when lens and circle surface are non-paralell because of objective reason by using this method rather than Hough transform.Experiment proves that this method is simple and effective,with good tolerance and(robustness.) |
| |
| Keywords: | circle detectioning Hough transform roundness |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《山东大学学报(工学版)》浏览原始摘要信息 |
|
点击此处可从《山东大学学报(工学版)》下载全文 |
