| 矿用自卸车刹车加力器联接螺栓故障分析 |
| |
| 引用本文： | 胡大宇.矿用自卸车刹车加力器联接螺栓故障分析[J].煤矿机械,2003(2):77-79. |
| |
| 作者姓名： | 胡大宇 |
| |
| 作者单位： | 湖南省工业设备安装公司,湖南,长沙,410008 |
| |
| 摘 要： | 针对矿用自卸车的刹车加力器上的联接螺栓被拉断的情况 ,对其螺栓进行了强度校核 ,结果发现联接螺栓的强度不够。所以采取了改变螺栓尺寸和采用粘接剂进行紧固和防松等措施 ,使联接螺栓故障现象消除。
|
| 关 键 词： | 故障 相关性措施 刹车加力器 矿用自卸车 |
| 文章编号： | 1003-0794(2003)02-0077-03 |
| 修稿时间： | 2002年9月22日 |
Analysis on malfunction and relativity measures about joint bolts of break accumulator in mining auto-unloading vehicle |
| |
| HU Da-yu.Analysis on malfunction and relativity measures about joint bolts of break accumulator in mining auto-unloading vehicle[J].Coal Mine Machinery,2003(2):77-79. |
| |
| Authors: | HU Da-yu |
| |
| Abstract: | The intensities about the joint bolts of break accumulator in mining auto-unloading vehicle were checked based on the case of the malfunction that joint bolts of its had been snapped.The result revealed that inadequate intensities about the joint bolts were the main reason of causing the malfunction.Therefore,after some measures that changed dimension of the bolts and introducing adhesive to tighten the bolts were carried out,the malfunction could be avoided. |
| |
| Keywords: | malfunction relativity measures break accumulator mining auto-unloading vehicle |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
