| 两次斜顶抽芯注射模结构设计 |
| |
| 引用本文： | 朱洪林.两次斜顶抽芯注射模结构设计[J].模具制造,2008,8(9):45-47. |
| |
| 作者姓名： | 朱洪林 |
| |
| 作者单位： | 坚利塑胶制品有限公司,广东东莞,523000 |
| |
| 摘 要： | 在注射模设计中，由于塑件结构及功能要求，有时候需要两次斜顶抽芯，才能保证模具的成型质量及塑件批量生产需求。主要介绍了抽芯结构，同时阐述了此结构设计时应注意的问题。
|
| 关 键 词： | 注射模 塑件 斜顶 抽芯机构 |
Design of Injection Mold with Twice Angle Ejection Core-Pulling Mechanism |
| |
| ZHU Hong-lin.Design of Injection Mold with Twice Angle Ejection Core-Pulling Mechanism[J].Die & Mould Manufacture,2008,8(9):45-47. |
| |
| Authors: | ZHU Hong-lin |
| |
| Abstract: | In injection mold design, because function, sometimes need twice angle ejection quality and mold volume production on demand. elaborated attention points when designing twice of the request of plastic parts structure and core-pulling mechanism, guaranteed molding Mainly introduced core-pulling mechanism, and angle ejection core-pulling mechanism. |
| |
| Keywords: | injection mold plastic part angle ejector core-pulling mechanism |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
