| 基于行为建模技术的翻领式成型器三维建模研究 |
| |
| 引用本文： | 余群,吴志军.基于行为建模技术的翻领式成型器三维建模研究[J].包装工程,2006,27(2):138-140. |
| |
| 作者姓名： | 余群 吴志军 |
| |
| 作者单位： | 武汉工业学,武汉,430023;武汉工业学,武汉,430023 |
| |
| 摘 要： | 根据翻领器曲面在成型前后面积和边长不变的特性,利用Pro/E提供的行为建模技术,对翻领器的三维建模进行了一定的研究,提高了翻领器设计的效率和质量,降低了建模过程中对曲面数学模型的依赖,并为此类曲面建模提供了一个实用的方法.
|
| 关 键 词： | 翻领式成型器 行为建模 Pro/E 计算机辅助设计 |
| 文章编号： | 1001-3563(2006)02-0138-03 |
| 收稿时间： | 2005-10-28 |
| 修稿时间： | 2005年10月28日 |
Development of 3D modeling of the lapel shaper based on the behavioral modeling technique |
| |
| YU Qun,WU Zhi-jun.Development of 3D modeling of the lapel shaper based on the behavioral modeling technique[J].Packaging Engineering,2006,27(2):138-140. |
| |
| Authors: | YU Qun WU Zhi-jun |
| |
| Affiliation: | Wuhan Polytechnic University, Wuhan 430023, China |
| |
| Abstract: | The 3D modeling of the lapel shaper was developed base on the characteristic of lapel shap- er surface that its area and length of side have no change after its molding, and with the behavioral modeling technique provided by Pro/E. It enhanced the efficiency and quality of the lapel shaper design, reduced the dependence on mathematical model of surface and provided a practical method for 3D modeling of this kind of Sulface. |
| |
| Keywords: | Pro/E |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
