首页 | 本学科首页   官方微博 | 高级检索  
     

冷轧废水深度处理及回用工程
引用本文:张金平,周欢,张章,赵文禹. 冷轧废水深度处理及回用工程[J]. 中国给水排水, 2012, 28(10): 70-72,76
作者姓名:张金平  周欢  张章  赵文禹
作者单位:1. 山东省冶金设计院股份有限公司,山东 莱芜,271104
2. 莱钢集团有限公司,山东莱芜,271104
摘    要:将冷轧过程产生的含油废水、脱脂平整废水、酸碱废水、生活污水、循环水排污水分流处理后收集,采用电催化氧化/MBR/反渗透进行深度处理并回用,处理水量为50 m3/h。工程实践表明,在实施有效预处理的条件下,出水水质优于《钢铁工业给水排水设计手册》中工业新水水质指标,废水处理成本为3.47元/m3,出水全部回用到循环水系统中,可节约工业新水消耗量为17×104 m3/a。

关 键 词:冷轧废水  深度处理  电催化氧化  膜生物反应器  反渗透  再生回用  循环水系统

Advanced Treatment of Cold-rolling Wastewater from Laiwu Steel Group and Reuse Engineering
ZHANG Jin-ping , ZHOU Huan , ZHANG Zhang , ZHAO Wen-yu. Advanced Treatment of Cold-rolling Wastewater from Laiwu Steel Group and Reuse Engineering[J]. China Water & Wastewater, 2012, 28(10): 70-72,76
Authors:ZHANG Jin-ping    ZHOU Huan    ZHANG Zhang    ZHAO Wen-yu
Affiliation:1.Shandong Province Metallurgical Engineering Co.Ltd.,Laiwu 271104,China;2.Laiwu Steel Group Co.Ltd.,Laiwu 271104,China)
Abstract:After the oily wastewater,degreasing leveling wastewater,acid-base wastewater,sewage and circulating water discharge produced during cold-rolling are respectively treated and collected,the combined process of electric catalytic oxidation,MBR and RO is used for advanced treatment and reuse.The treatment capacity is 50 m3/h.The engineering practice shows that after the effective pretreatment,the effluent quality from the advanced treatment is better than the industrial new water quality index in Design Manual for Steel Industrial Water Supply and Wastewater.The wastewater treatment cost is 3.47 yuan/m3,all the effluent is reused in the circulating water system,and the industrial new water consumption of 17×104 m3/a is saved.
Keywords:cold-rolling wastewater  advanced treatment  electric catalytic oxidation  membrane bioreactor  reverse osmosis  reuse  circulating water system
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号