The corrosion inhibition of Ti-alloy (VT-9) in mixture of H2SO4-NaF by organic compounds

This investigation deals with corrosion behavior of high strength titanium alloy in concentrated sulphuric acid solution containing different concentrations (500, 1000, 1500 ppm) of fluoride ion (F⁻) using various organic compounds (MPA, L-OH, NFP) as inhibitor, potentiodynamically. The open circuit potential values noted before and after each experiment, varied appreciably. These values were negative before polarization but after completion of the experiment turned positive and remained stable over long period of time. It is observed that cathodic current density values increase with increasing cathodic potential (more negative) and fluoride ion. The values of cathodic Tafel slopes derived from the curves (∼110 − 140 mV/dec I) indicate hydrogen evolution reaction (h.e.r). The corrosion potential (E _corr) varied slightly with addition of inhibitors. The corrosion current densities (I _corr) increased with increasing fluoride ion concentration, but these values decreased appreciably when inhibitor (MPA) was used. SEM micrograph reveals reduction of pits in the presence of inhibitor (MPA). So this concludes that organic compound was used in this case acts as a good inhibitor. The article is published in the original.