| 精密多工位级进模运动仿真研究 |
| |
| 引用本文： | 岳陆游,徐明,陈炜,周芝福,孙志浩,殷黎明.精密多工位级进模运动仿真研究[J].模具工业,2009,35(12):6-9. |
| |
| 作者姓名： | 岳陆游 徐明 陈炜 周芝福 孙志浩 殷黎明 |
| |
| 作者单位： | 1. 江苏大学模具技术研究所,江苏,镇江,212013
2. 江苏省精密高速模具工程技术研究中心,江苏,昆山,215316 |
| |
| 基金项目： | 国家自然基金项目，江苏省教育厅"青蓝工程"资助项目 |
| |
| 摘 要： | 通过对级进模工作过程的分析,以冲裁拉深级进模为例,采用运动仿真技术,结合运动函数对级进模工作过程进行协调设计,从而确保精密多工位级进模具的使用寿命。并对精密多工位级进模的工作过程进行了深入研究,确定复杂结构运动的协调性是精密级进模必须解决的问题。
|
| 关 键 词： | 级进模 运动仿真 协调性 |
The movement simulation of precision multi-position progressive dies |
| |
| YUE Lu-you,XU Ming,CHEN Wei,ZHOU Zhi-fu,SUN Zhi-hao,YIN Li-ming.The movement simulation of precision multi-position progressive dies[J].Die & Mould Industry,2009,35(12):6-9. |
| |
| Authors: | YUE Lu-you XU Ming CHEN Wei ZHOU Zhi-fu SUN Zhi-hao YIN Li-ming |
| |
| Affiliation: | YUE Lu-you1,XU Ming1,CHEN Wei1,ZHOU Zhi-fu2,SUN Zhi-hao2,YIN Li-ming2(1.Institute of Die & Mould Technology,Jiangsu University,Zhenjiang,Jiangsu 212013,China,2.Jiangsu Engineering Technology Research Center of Precision High-speed Die,Kunshan,Jiangsu 215316,China) |
| |
| Abstract: | The motion process of progressive blanking and drawing dies was analyzed and a coordination design was implemented by using movement simulation technology and motion functions,in which way precision multi-position progressive dies can have a longer service life.A further study on the structural motion of precision progressive dies indicates that coordination of complicated structural motion system should be solved for the dies. |
| |
| Keywords: | progressive die movement simulation coordination |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
