首页 | 本学科首页   官方微博 | 高级检索  
     

预防蓄电池过放电保护电路
引用本文:杨维国,刘恩臣,孙树旺. 预防蓄电池过放电保护电路[J]. 郑州大学学报(工学版), 2000, 21(2): 58-60
作者姓名:杨维国  刘恩臣  孙树旺
作者单位:郑州工业大学开普公司!河南郑州450002(杨维国,刘恩臣),郑州工业大学化工学院!河南郑州450002(孙树旺),郑州工业大学新能源研究室!河南郑州450002(杨满香)
摘    要:用蓄电池做后备电源的系统 (或设备 ) ,常因过放电导致电池提前报废而造成设备故障 .根据电池电压随容量变化的规律 ,利用电压比较器和电压基准源设计制作了电池放电保护电路 ,当电池放电量接近容量的 5 0 %时 ,启动预警信号 ;当电池放电量达到容量的 80 %时 ,电路自动切断负载 ,防止电池过度放电 ,延长电池寿命 ,保证系统 (或设备 )在供电恢复正常后能正常运行 .

关 键 词:后备电源  过放电  切断  蓄电池  负载
修稿时间::

A Protection Circuit for Batteries Overwork
YANG Wei-guo ,LIU En-chen ,SUN Shu-wang ,YANG Man-xiang. A Protection Circuit for Batteries Overwork[J]. Journal of Zhengzhou University: Eng Sci, 2000, 21(2): 58-60
Authors:YANG Wei-guo   LIU En-chen   SUN Shu-wang   YANG Man-xiang
Affiliation:YANG Wei-guo 1,LIU En-chen 1,SUN Shu-wang 2,YANG Man-xiang 3
Abstract:The rechargeble batteries are used for backup power internal electrically equipments and instruments.But batteries lifetime usually is shorten by overwork and then malfunctions of equipment are induced.To avoid the complexion described above,the protection circuit against overwork is designed.It is based upon the voltage comparator and regulator.It will light up a red LED when the volume of the batteries discharged close upon 50%;It will switch off the load automatically when it discharged closing to 80% of their energy capacity,thus overwork of batteries can be avoided and lifetime may be extended.
Keywords:backup-power  overwork  switch off  secondary cell  load  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号