| 木粉改性陶瓷器皿的初步研究 |
| |
| 引用本文： | 徐信武,徐海燕,曹婷,郭锐. 木粉改性陶瓷器皿的初步研究[J]. 木材加工机械, 2006, 17(6): 22-24 |
| |
| 作者姓名： | 徐信武 徐海燕 曹婷 郭锐 |
| |
| 作者单位： | 南京林业大学,南京,210037 |
| |
| 摘 要： | 提出了一种木质砂光粉资源化利用的新途径。采用砂光粉代替部分粘土(比例:10%、15%、20%),在高温绝氧条件下烧制成园艺器皿。测试了器皿的物理力学性能,并分析了材料的显微构造特征。结果表明:改性过的木粉陶瓷花盆孔隙率高,透气性好;密度小,强重比高;吸水率高,膨胀率低;砂光粉施加比例可达15%。
|
| 关 键 词： | 砂光木粉 陶瓷花盆 |
| 文章编号： | 1001-036X(2006)06-0022-03 |
| 修稿时间： | 2006-09-01 |
Utilization of wood powder in the manufacture of ceramic flowerpot |
| |
| XU Xin-wu,XU Hai-yan,CAO Ting,GUO Rui. Utilization of wood powder in the manufacture of ceramic flowerpot[J]. Wood Processing Machinery, 2006, 17(6): 22-24 |
| |
| Authors: | XU Xin-wu XU Hai-yan CAO Ting GUO Rui |
| |
| Abstract: | Sanding particulates from wood furniture industry were utilized substituting soil to make flower pot at percentage of 10%,15%,and 20%.It was found that a maximum wood composition of 15% was reached.The pots with sanding wood powder showed higher permeability,lower density,higher strength-to-density ratio,higher water absorption and little swelling. |
| |
| Keywords: | wood powder ceramic flowerpot |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
