首页 | 本学科首页   官方微博 | 高级检索  
     

纳米Al-MoO_3发火性能研究
引用本文:薛艳,任小明,解瑞珍,史春红,刘兰,张晔.纳米Al-MoO_3发火性能研究[J].含能材料,2010,18(6):674-676.
作者姓名:薛艳  任小明  解瑞珍  史春红  刘兰  张晔
作者单位:中国兵器工业第213研究所,火工品安全性可靠性国防科技重点实验室,陕西,西安,710061
摘    要:为研制高能量密度无铅的火工药剂,以纳米铝粉和纳米氧化钼为原料,采用超声分散混合的方法,制备了绿色环保的纳米含能材料Al-MoO3。通过冷场扫描电镜和差热分析(DSC)对纳米含能材料Al-MoO3进行了表征分析,制作了电点火头和激光点火头,进行了点火性能测试。结果表明:纳米含能材料Al-MoO3在520℃以上的高温条件下反应,放出大量的热,其中电点火头的50%的电压发火感度为22.8V,激光点火头的50%的发火感度为5.1mJ。

关 键 词:纳米含能材料Al-MoO3  感度  点火性能
收稿时间:4/15/2010 3:35:53 PM
修稿时间:11/1/2010 8:46:09 PM

Ignition Performance of Nano Al-MoO3
XUE Yan,REN Xiao-ming,XIE Rui-zhen,SHI Chun-hong,LIU Lan and ZHANG Ye.Ignition Performance of Nano Al-MoO3[J].Chinese Journal of Energetic Materials,2010,18(6):674-676.
Authors:XUE Yan  REN Xiao-ming  XIE Rui-zhen  SHI Chun-hong  LIU Lan and ZHANG Ye
Affiliation:Shannxi Applied Physics-Chemistry Research Institute
Abstract:The nano-energetic materials Al-MoO3 is prepared by immersing the powders in a solvent and then mixing the two powders including nano-Al and MoO3 using an ultrasonic mixer. The performance of nano-energetic materials Al-MoO3 was analyzed by means of Scanning Electron Microscopy (SEM) and Differential Scanning Calorimetry (DSC). Preparedand electrical match and laser match, and ignition sensitivity were tested. The study shows that nano-energetic materials Al-MoO3 is reaction under high temperature giving out lots of heat, voltage ignition sensitivity and electricity ignition sensitivity of electrical match and laser ignition sensitivity of laser match,its 50% sensitivity is 22.8V, 462mA and 5.1mJ respectively.
Keywords:Nano-energetic materials Al-MoO3    Sensitivity    Ignition  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《含能材料》浏览原始摘要信息
点击此处可从《含能材料》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号