| 模具型腔复合抛光工艺规律研究 |
| |
| 引用本文： | 赵雪松,杨明,朱树敏. 模具型腔复合抛光工艺规律研究[J]. 现代制造工程, 2002, 0(10): 61-63 |
| |
| 作者姓名： | 赵雪松 杨明 朱树敏 |
| |
| 作者单位： | 1. 安徽工程科技学院机械工程系,芜湖,241000
2. 合肥工业大学特种加工研究所 |
| |
| 基金项目： | 安徽省高等学校青年教师科研资助计划项目 (2 0 0 2jq1 1 3) |
| |
| 摘 要： | 阐述采用脉冲电流电化学抛光的特点、实施方案和工艺效果 ,并通过对某种模具型腔窄深槽抛光的工艺试验 ,讨论并分析实验数据 ,得出加工参数对表面粗糙度的影响规律 ,以及各加工参数影响表面粗糙度的经验公式。为这类孔槽抛光提供了一种有效的工艺方法
|
| 关 键 词： | 脉冲电流 抛光 模具型腔 表面粗糙度 |
| 文章编号： | 1671-3133(2002)10-0061-03 |
| 修稿时间： | 2002-05-20 |
The investigation of the inner cavity of mould by polishing rules |
| |
| Zhao Xuesong,Yang Ming Zhu Shumin. The investigation of the inner cavity of mould by polishing rules[J]. Modern Manufacturing Engineering, 2002, 0(10): 61-63 |
| |
| Authors: | Zhao Xuesong Yang Ming Zhu Shumin |
| |
| Abstract: | The thesis describe the principle and the schema of experiments which can fulfil the pulse current electrochemical polishing. Several steel materials were experimentalized by the pulse current electrochemical polishing.Through the experiment,the regularity were achieved that the ralation of influence of machining parameters on surface roughness.A rule of influence of machining parameters on su- rface roughness was obtained a empirical formula.Avalid craftwork were offered for the inner cavity of mould. |
| |
| Keywords: | Pulse current Polishing The inner cavity of mould Surface roughness |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
