Experiments on slider lubricant interactions and lubricant transfer using TFC sliders

Future magnetic storage density targets (>4 Tb/in. ²) require subnanometer physical clearances that pose a tremendous challenge to the head disk interface (HDI) design. A detailed understanding of slider-lubricant interactions at small clearances and contact is important to not only address magnetic spacing calibration and long term HDI reliability but also to meet additional challenges imposed by future recording architectures such as heat assisted magnetic recording (HAMR). In this work, the behavior of the disk lubricant is investigated through controlled tests using TFC sliders which are actuated to proximity (i.e. backoff) and into contact (i.e. overpush) on one specific half of the disk per rotation by synchronization with the spindle index. Observations for lubricant distribution in contact tests (i.e. overpush) reveal an accumulation of lubricant on the disk near the onset of contact suggesting a migration of lubricant from the slider to the disk as the slider approaches the disk. Experiments also reveal that there is a similar deposition of lubricant even in the absence of contact for backoff tests. Furthermore, light contact tests result in significant lubricant rippling and depletion with associated slider dynamics. The lubricant rippling frequencies correlate well with the slider’s vibration frequencies. Interestingly, strong overpush may lead to stable slider dynamics (for certain air bearing designs) that is also associated with noticeably lower lubricant distribution (compared to the light contact case), and the greatest lubricant changes are observed only at the onset and the end of contact. This paper reveals the complex nature of slider-lubricant interactions under near-contact and contact conditions, and it highlights the need for further studies on the topic to help design a HDI for recording architectures of the future.