| 采用钢渣和铅锌尾矿制备硅酸盐水泥熟料的研究 |
| |
| 引用本文： | 陈苗苗,段加超,冯春花. 采用钢渣和铅锌尾矿制备硅酸盐水泥熟料的研究[J]. 水泥工程, 2014, 27(3): 19-21 |
| |
| 作者姓名： | 陈苗苗 段加超 冯春花 |
| |
| 作者单位： | [1]马鞍山市建设工程质量检测中心,安徽马鞍山243011 [2]河南理工大学材料科学与工程学院,河南 焦作454000 |
| |
| 摘 要： | 探讨了钢渣和铅锌尾矿分别取代铁粉和黏土制备硅酸盐水泥熟料的可行性,对其易烧性进行了研究,并对制备出的熟料进行了力学性能研究。结果表明:采用钢渣和铅锌尾矿进行生料配料,熟料的烧成温度为1 450℃,煅烧时间为30 min时,制备出的熟料w(f-CaO)小于1%;水泥熟料的28d抗折和抗压强度分别达到了9.6MPa和60.4MPa。
|
| 关 键 词： | 钢渣 铅锌尾矿 熟料 f-CaO |
Study on Portland cement clinker preparation using steel slag and lead-zinc tailings |
| |
| Chen Miaomiao,Duan Jiachao,Feng Chunhua. Study on Portland cement clinker preparation using steel slag and lead-zinc tailings[J]. Cement Engineering, 2014, 27(3): 19-21 |
| |
| Authors: | Chen Miaomiao Duan Jiachao Feng Chunhua |
| |
| Affiliation: | 1.Maanshan Construction Engineering Quality Test Center, Anhui, Maanshan 243011) |
| |
| Abstract: | The feasibility of preparing Portland cement clinker substituting steel slag and lead-zinc tailings for iron and clay was discussed, the burnability was studied, and the mechanical property of prepared clinker was researched. The results show that using steel slag and zinc tailings in raw meal proportioning, the clinker sintering temperature was 1 450℃and the calcining time was 30 min, and w（f-CaO）in prepared clinker is less than 1%;the 28 d flexural and compressive strength reached 9.6 MPa and 60.4 MPa respectively. |
| |
| Keywords: | steel slag lead-zinc tailing clinker f-CaO |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《水泥工程》浏览原始摘要信息 |
|
点击此处可从《水泥工程》下载全文 |
|
