|
|||||
|
|
| 低频电磁铸造6063铝合金的数值模拟和试验研究 | |
| 引用本文： | 李建超,崔建忠,王宝峰,麻永林.低频电磁铸造6063铝合金的数值模拟和试验研究[J].特种铸造及有色合金,2006,26(2):87-89. |
| 作者姓名： | 李建超 崔建忠 王宝峰 麻永林 |
| 作者单位： | 1. 东北大学;内蒙古科技大学 2. 东北大学 3. 内蒙古科技大学 |
| 摘 要： | 采用ANSYS有限元法对低频电磁铸造铝合金过程进行了数值模拟，分析了频率为15Hz电流为150A，匝数为80匝时，铸锭边部及内部的磁感应强度分布，并在此条件下进行试验研究。试验结果表明，低频电磁铸造铝合金铸锭表面光洁，消除了铸锭表面的冷隔和表面偏析瘤，内部晶粒细小且为近球形，同时分析了质量改进的原因。 |
| 关 键 词： | 电磁场 铸造 数值模拟 铝合金 组织 |
| 文章编号： | 1001-2249（2006）02-0087-03 |
| 收稿时间： | 2005-11-01 |
| 修稿时间： | 2005年11月1日 |
Numerical Simulation and Its Experiment of 6063 Aluminum Alloys in Low-frequency Electromagnetic Casting |
|
| Li Jianchao,Cui Jianzhong,Wang Baofeng,Ma Yonglin.Numerical Simulation and Its Experiment of 6063 Aluminum Alloys in Low-frequency Electromagnetic Casting[J].Special Casting & Nonferrous Alloys,2006,26(2):87-89. | |
| Authors: | Li Jianchao Cui Jianzhong Wang Baofeng Ma Yonglin |
| Abstract: | The simulation of aluminum alloy in low frequency electromagnetic casting was performed by the ANSYS finite element method.In case of the frequency 15 Hz,current 150 A,coils 80,the magnetic flux intensity distribution in inter and outer of the ingot was analyzed,where the experiment was conducted also.The results show that the surface of the ingot is smooth,and its grain size is fine and globular,eliminating surface cold shut and exudations.The reason for the improved quality of the ingot is discussed. |
| Keywords: | Electromagnetic Field Casting Numerical Simulation Aluminum Alloy Microstructure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |