| 硬质合金面铣刀铣削0Cr13Ni5Mo不锈钢切削性能的试验研究 |
| |
| 引用本文： | 曲波,周辉,江崇民,王立平,金之垣,段广洪. 硬质合金面铣刀铣削0Cr13Ni5Mo不锈钢切削性能的试验研究[J]. 工具技术, 2003, 37(2): 3-4 |
| |
| 作者姓名： | 曲波 周辉 江崇民 王立平 金之垣 段广洪 |
| |
| 作者单位： | 1. 齐齐哈尔二机床企业集团
2. 清华大学 |
| |
| 基金项目： | 国家 8 63计划资助项目 (项目编号 :2 0 0 1AA42 1110 )，清华大学机械学院基金资助项目 (项目编号 :0 912 0 2 0 0 3 )，黑龙江省省校合作项目 (项目编号 :2 0 0 0 5 5 1) |
| |
| 摘 要： | 通过铣削 0Cr13Ni5Mo不锈钢的切削试验 ,对两种硬质合金面铣刀的切削寿命、卷屑和分屑效果、对工艺系统的动态影响等切削性能进行了分析研究 ,结果表明两种面铣刀在不同切削条件下具有不同的切削性能 ,分别适用于粗铣和半精铣加工
|
| 关 键 词： | 硬质合金 面铣刀 切削性能 |
| 修稿时间： | 2002-09-01 |
Experimental Investigation on Cutting Performances of Carbide Face Milling Cutters During Cutting 0Cr13Ni5Mo |
| |
| Qu Bo Zhou Hui Jiang Chongming et al. Experimental Investigation on Cutting Performances of Carbide Face Milling Cutters During Cutting 0Cr13Ni5Mo[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 2003, 37(2): 3-4 |
| |
| Authors: | Qu Bo Zhou Hui Jiang Chongming et al |
| |
| Affiliation: | Qu Bo Zhou Hui Jiang Chongming et al |
| |
| Abstract: | Through a cutting experiment of milling 0Cr13Ni5Mo stainless steel, some cutting performances of two kinds of carbide face milling cutters such as tool life, effectiveness of chip forming and dividing and dynamic effect of process system are analyzed and investigated. The results indicate that different cutting performances of two kinds of face milling cutters are appeared under different cutting conditions, so they are applicable separately for rough mill and half finish mill. |
| |
| Keywords: | cemented carbide face milling cutter cutting performance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
