| 滚动工况下钢质车轮和铝合金车轮的有限元分析对比 |
| |
| 引用本文： | 安娟,潘宏侠,周云峰,田静宜. 滚动工况下钢质车轮和铝合金车轮的有限元分析对比[J]. 轻合金加工技术, 2012, 0(2): 55-58 |
| |
| 作者姓名： | 安娟 潘宏侠 周云峰 田静宜 |
| |
| 作者单位： | 1. 中北大学机械工程与自动化学院,山西太原,030051
2. 河北联合大学轻工学院,河北石家庄,063000 |
| |
| 基金项目： | 国家自然科学基金资助(50875247);山西省自然科学基金资助(2011011019-1) |
| |
| 摘 要： | 根据车轮的结构和实际工作条件,采用ANSYS有限元分析技术,建立1/16车轮的模型。计算了滚动工况下钢质车轮、铝合金车轮在不同转速下的应力值和变形值。通过对比分析计算结果,得出的结论可为铝合金车轮的设计提供依据,最后作试验验证了所建模型的合理性。
|
| 关 键 词： | 钢 铝合金 车轮 有限元分析 |
Finite element comparative analysis of steel wheel and aluminum alloy wheel on turning condition |
| |
| AN Juan , PAN Hong-xia , ZHOU Yun-feng , TIAN Jing-yi. Finite element comparative analysis of steel wheel and aluminum alloy wheel on turning condition[J]. Light Alloy Fabrication Technology, 2012, 0(2): 55-58 |
| |
| Authors: | AN Juan PAN Hong-xia ZHOU Yun-feng TIAN Jing-yi |
| |
| Affiliation: | 1.School of Mechanical Engineering and Automation,Central North University,Taiyuan 030051,China; 2.Qinggong College,Hebei United University,Shijiazhouang 063000,China) |
| |
| Abstract: | At the base of wheel structure and working condition,a finite element model with the size of 1/16 wheel has been set up using ANSYS finite element analysis technology.The stress and deformation of the steel wheel and aluminum alloy wheel which worked at different velocity have been calculated.The results indicate that the design of aluminum alloy wheel is correct and the model is reasonable. |
| |
| Keywords: | steel aluminum alloy wheel finite element analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
