| Mg-3Al-2Sc合金显微组织与性能研究 |
| |
| 引用本文： | 沙桂英,王晓磊,刘腾,李朝华,韩玉. Mg-3Al-2Sc合金显微组织与性能研究[J]. 轻合金加工技术, 2012, 40(3): 51-54 |
| |
| 作者姓名： | 沙桂英 王晓磊 刘腾 李朝华 韩玉 |
| |
| 作者单位： | 1. 沈阳航空航天大学材料科学与工程学院,辽宁沈阳,110136
2. 沈阳航空航天大学材料科学与工程学院,辽宁沈阳110136;美国韦恩州立大学机械工程系,密歇根州底特律48202 |
| |
| 基金项目： | 国家自然科学基金(50801048);航空科学基金(2007ZF54016) |
| |
| 摘 要： | 采用熔剂保护法制备了Mg-3Al-2Sc合金,并进行热挤压,研究了添加Sc及热挤压后Mg-3Al-2Sc合金的组织与性能.结果表明,稀土Sc能够细化晶粒并形成新的Al3Sc相；热挤压后Mg-3Al-2Sc合金发生了局部动态再结晶,合金屈服强度和抗拉强度较AZ31镁合金的显著提高,拉伸断裂机制主要表现为准解理断裂,并有一定量的沿晶断裂.
|
| 关 键 词： | Mg-Al-Sc合金 热挤压 再结晶 显微组织 力学性能 |
Microstructure and property study of Mg-3Al-2Sc alloy |
| |
| SHA Gui-ying , WANG Xiao-lei , LIU Teng , LI Zhao-hua , HAN Yu. Microstructure and property study of Mg-3Al-2Sc alloy[J]. Light Alloy Fabrication Technology, 2012, 40(3): 51-54 |
| |
| Authors: | SHA Gui-ying WANG Xiao-lei LIU Teng LI Zhao-hua HAN Yu |
| |
| Affiliation: | 1 (1.Institute of Materials Science and Engineering,Shenyang Aerospace University,Shenyang 110136,China; 2.Department of Mechanical Engineering,Wayne State University,Detroit 48202,USA) |
| |
| Abstract: | Mg-3Al-2Sc alloy has been smelted with protecting flux,and the ingot has been hot-extruded.The effect of additive Sc on microstructure and properties of Mg-3Al-2Sc alloy extrusions has been investigated.The results show that the grains have been refined and new Al3Sc phases have been occurred in the Mg-3Al-2Sc alloy while the rare earth Sc being added.Partial dynamic re-crystallization has been formed in the extruded Mg-3Al-2Sc alloy.The yield strength and tensile strength of Mg-3Al-2Sc alloy have been greatly improved compared AZ31 magnesium alloy.The tensile fracture micro-mechanism is mainly quasi-cleavage fracture and inter-granular fracture. |
| |
| Keywords: | Mg-3Al-2Sc alloy hot-extrusion re-crystallization microstructure mechanical property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
