首页 | 本学科首页   官方微博 | 高级检索  
     

电刷端盖压铸模设计
引用本文:胡彦辉,王运诚. 电刷端盖压铸模设计[J]. 特种铸造及有色合金, 2005, 25(5): 290-291
作者姓名:胡彦辉  王运诚
作者单位:1. 湖南工业职业技术学院
2. 武汉工业国有控股集团公司
摘    要:电刷端盖压铸件为圆形端盖类零件.针对电刷端盖压铸件结构及工艺要求,选择端盖口部大端面为动静模分型面,铸件上各成形小孔由动静模型芯对接组成,浇注系统采用中心浇道.由于抽芯距离短,采用斜销抽芯.

关 键 词:电刷端盖  压铸模  中心浇道  斜销抽芯
文章编号:1001-2249(2005)05-0290-02
修稿时间:2005-04-05

Die Casting Die For Brush Cover
Hu Yanhui,Wang Yuncheng. Die Casting Die For Brush Cover[J]. Special Casting & Nonferrous Alloys, 2005, 25(5): 290-291
Authors:Hu Yanhui  Wang Yuncheng
Abstract:Large end face of cover was choosed as the parting face of moving and static container based on the structure of brush cover and technology.The small formation holes in the brush cover was constructed with the mold core in moving and static container,and center ingate was employed to the gating system.Oblique tenon was adopted to draw core due to the short distance of drawing-core.
Keywords:Brush Cover  Die Casting Die  Center Ingate  Oblique Tenon Drawing-core  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号