首页 | 本学科首页   官方微博 | 高级检索  
     

Density Measurement of Liquid Ni-Ta Alloys by a Modified Sessile Drop Method
引用本文:FANGLiang XIAOFeng TAOZainan KusuhiroMukai. Density Measurement of Liquid Ni-Ta Alloys by a Modified Sessile Drop Method[J]. 武汉理工大学学报(材料科学英文版), 2005, 20(2): 67-70. DOI: 10.1007/BF02838492
作者姓名:FANGLiang XIAOFeng TAOZainan KusuhiroMukai
作者单位:[1]SatelliteVentureBusinessLaboratory,KyushuInstituteofTechnology,Kitakyushu804-8550,Japan [2]DepartmentofAppliedPhysics,ChongqingUniversity,Chongqing400044,China//SatelliteVentureBusinessLaboratory,KyushuInstituteofTechnology,Kitakyushu804-8550,Japan [3]SatelliteVentureBusinessLaboratory,KyushuInstituteofTechnology,Kitakyushu804-8550,Japan//ChongqingInstituteofTechnology,Chongqing400050,China
基金项目:FundedbytheScientificResearchFoundationfortheReturedOverseasChineseScholoars,StateEducationMinistry(No.2004527)andtheNaturalScienceFoundationofChongqingMunicipality(No.8427and8656)andperformedasapartof“InvestigationandDevelopmentofInnovativeSimulationTechnologyinCastingProcess”SupportedbyNewEnergyandIndustrialTechnologyDevelopmentOrganizationinJapan
摘    要:The density of liquid Ni- Ta alloys was measured by using a modified sessile drop method. It is found that the density of the liquid Ni- Ta alloys decreases with the increasing temperature, but increases with the increase of tantalum concentration in the alloys. The molar volume of liquid Ni- Ta binary alloys increases with the increase of temperature ancl tantalum concentration.

关 键 词:Ni-Ta合金 密度 克分子体积 钽富集
收稿时间:2004-08-18
修稿时间:2005-01-25

Density measurement of liquid Ni−Ta alloys by a modified sessile drop method
Fang Liang,Xiao Feng,Tao Zainan,Kusuhiro Mukai. Density measurement of liquid Ni−Ta alloys by a modified sessile drop method[J]. Journal of Wuhan University of Technology. Materials Science Edition, 2005, 20(2): 67-70. DOI: 10.1007/BF02838492
Authors:Fang Liang  Xiao Feng  Tao Zainan  Kusuhiro Mukai
Affiliation:(1) Department of Applied Physics, Chongqing University, 400044 Chongqing, China;(2) Satellite Venture Business Laboratory, Kyushu Institute of Technology, 804-8550 Kitakyushu, Japan;(3) Chongqing Institute of Technology, 400050 Chongqing, China
Abstract:The density of liquid Ni-Ta alloys was measured by using a modified sessile drop method. It is found that the density of the liquid Ni-Ta alloys decreases with the increasing temperature, but increases with the increase of tantalum concentration in the alloys. The molar volume of liquid Ni-Ta binary alloys increases with the increase of temperature and tantalum concentration.
Keywords:Ni-Ta alloy  density  modified sessile drop method  molar volume  tantalum concentration
本文献已被 CNKI 维普 万方数据 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号