首页 | 本学科首页   官方微博 | 高级检索  
     

GDI汽油机复合供油系统参数优化的数值模拟
引用本文:李明,刘德新.GDI汽油机复合供油系统参数优化的数值模拟[J].哈尔滨工业大学学报,2011,43(1):139-144.
作者姓名:李明  刘德新
作者单位:天津大学内燃机燃烧学国家重点实验室;天津大学内燃机燃烧学国家重点实验室
基金项目:国家高技术研究发展计划资助项目(2006AA110108)
摘    要:为促进直喷式汽油机冷启动工况下缸内均匀混合气的形成,提出一种应用于直喷式汽油机的新式供油系统--复合供油系统.采用三维数值模拟方法,探讨其低压供油部分喷油器位置的优化设计,分析复合供油系统对直喷式汽油机冷启动工况下缸内油气混合状态的影响.结果表明,选择适当的低压喷油器位置对进气歧管内油气混合过程以及进气冲程中进入缸内的...

关 键 词:汽油机  缸内直喷  复合供油系统  低压喷油器

Numerical simulation of parameter optimization of compound fuel supply system for gasoline direct injection engine
LI Ming and LIU De-xin.Numerical simulation of parameter optimization of compound fuel supply system for gasoline direct injection engine[J].Journal of Harbin Institute of Technology,2011,43(1):139-144.
Authors:LI Ming and LIU De-xin
Affiliation:State Key Laboratory of Engines,Tianjin University,300072 Tianjin,China;State Key Laboratory of Engines,Tianjin University,300072 Tianjin,China
Abstract:To improve the mixing of homogenous air-fuel in cylinder,a new fuel supply system for gasoline direct injection engine,compound fuel supply system was presented. With the three-dimensional numerical simulation method,the optimum design of low-pressure fuel injector position was investigated,and the influence of compound fuel supply system on the air-fuel mixture formation in cylinder under the cold-start condition of GDI engine was analyzed. The results showed that the air-fuel mixing process in intake manifolds and the concentration of mixture entered into the cylinder during the intake stroke were greatly influenced by the low-pressure fuel injector position. The compound fuel supply system can improve the mixing of air-fuel and the distribution of air-fuel ratio in cylinder under the cold-start condition,and reduce the HC emission.
Keywords:gasoline engine  direct injection  compound fuel supply system  low-pressure fuel injector
本文献已被 CNKI 等数据库收录!
点击此处可从《哈尔滨工业大学学报》浏览原始摘要信息
点击此处可从《哈尔滨工业大学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号