| W-40%Cu热加工摩擦因子与换热系数测定 |
| |
| 引用本文： | 李达人,刘祖岩,于洋,王尔德. W-40%Cu热加工摩擦因子与换热系数测定[J]. 粉末冶金技术, 2009, 27(3) |
| |
| 作者姓名： | 李达人 刘祖岩 于洋 王尔德 |
| |
| 作者单位： | 哈尔滨工业大学材料科学与工程学院,哈尔滨,150001 |
| |
| 摘 要： | 对W-40%Cu(质量分数)粉末烧结材料在热加工数值模拟过程中需要确定的坯料与模具间的界面摩擦因子,以及与空气、模具间的换热系数进行了测定.摩擦因子直接通过圆环镦粗实验来确定.采用DEFORM软件对坯料传热过程中温度的变化进行了模拟,并将模拟得到的温度变化曲线与实际传热实验中获得的温度变化曲线相比较,确定了坯料在不同条件下的换热系数.结果显示,坯料在无润滑时与模具间摩擦因子为0.36,在石墨油润滑时为0.11;与空气自然对流换热系数取0.021N/(s·mm·℃),与模具无润滑剂接触时换热系数取0.11N/(s·mm·℃);加石墨油润滑且接触应力很小时取0.62N/(s·mm·℃),随着接触面应力从0.06MPa增大到90MPa,换热系数逐渐从3.4N/(s·mm·℃)增加到11N/(s·mm·℃).
|
| 关 键 词： | W-40％Cu粉末烧结材料 摩擦因子 换热系数 数值模拟 |
Measurement of the friction-factor and the heat transfer coefficient between W-40wt%Cu and die during hot processing |
| |
| Li Daren,Liu Zuyan,Yu Yang,Wang Erde. Measurement of the friction-factor and the heat transfer coefficient between W-40wt%Cu and die during hot processing[J]. Powder Metallurgy Technology, 2009, 27(3) |
| |
| Authors: | Li Daren Liu Zuyan Yu Yang Wang Erde |
| |
| Affiliation: | School of Materials Science and Engineering;Harbin Institute of Technology;Harbin 150001;China |
| |
| Abstract: | In this paper,the friction-factor between workpiece of W-40wt%Cu powder sintered composite and die,and the heat transfer coefficient between workpiece and air or die during hot processing have been measured.The friction-factor is determined by the ring upset test.The variation of workpiece temperature in the heat transfer test is simulated by DEFORM,which is used to compare with the experimental data to determine the heat transfer coefficient under different conditions.The results show that,the friction-fac... |
| |
| Keywords: | W-40wt%Cu powder sintered composite Friction-factor Heat transfer coefficient Numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
