Stress and strain analysis in tar-containing antiskid runways using finite element models |
| |
Authors: | Y. Xiao M.F.C. van de VenA.A.A. Molenaar S.P. Wu |
| |
Affiliation: | a Faculty of Civil Engineering and Geosciences, Delft University of Technology, The Netherlands b State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, China |
| |
Abstract: | Tar-containing antiskid surface layers are widely used for runways in airfields. Antiskid mixtures with tar-containing binders show apart from a high skid resistance, excellent adhesion of the antiskid layer to the underlying layer, and a extremely high fuel resistance, which make them more suitable for airfields than other materials. However, tar-containing antiskid has a high Polycyclic Aromatic Hydrocarbons (or PAHs) content, which makes them toxic to humans. Because of these environmental concerns, tar-containing antiskid runways are not allowed anymore after 2010 in the Netherlands. Therefore alternatives need to be developed.In order to be able to develop alternatives, the stress and strain distributions in a tar-containing antiskid surface layer should be evaluated. Structural characteristics and rheology properties of tar-containing antiskid surface layers were studied by means of nano CT scanning and Dynamic Shear Rheometer measurements, respectively. Using these results, two finite element models were developed. Stress and strain distributions in the antiskid layer under taking off and landing aircrafts were determined by means of these models. The results indicate that the stiffness of the binder has a slightly influence on the principal stress and strain. Finite element modeling (FEM) models can be developed for alternatives to tar-containing binder. |
| |
Keywords: | Antiskid surface layer Tar-containing Principal stress Dynamic Shear Rheometer Finite element model |
本文献已被 ScienceDirect 等数据库收录! |
|