| 模腔压力曲线与制品质量的关系研究 |
| |
| 引用本文： | 马国臻,叶超林,陈桂昌,廖芳明,吴宏武. 模腔压力曲线与制品质量的关系研究[J]. 中国塑料, 2016, 30(2): 71-74. DOI: 10.19491/j.issn.1001-9278.2016.02.014 |
| |
| 作者姓名： | 马国臻 叶超林 陈桂昌 廖芳明 吴宏武 |
| |
| 作者单位： | 1. 华南理工大学聚合物新型成型装备国家工程研究中心2. 华南理工大学聚合物新型成型装备国家工程研究中心；聚合物成型加工工程教育部重点实验室。 |
| |
| 摘 要： | 采用析因设计实验的方法，对模腔压力数据进行采集，研究了不同阶段模腔压力的变化规律曲线，分析了模腔压力与注塑制品质量的关系。结果表明，模腔压力直接决定着制品质量，充模阶段模腔压力上升情况对制品性能的影响较大，其次是冷却阶段的模腔压力下降情况。
|
| 关 键 词： | 析因设计 模腔压力 注塑制品 制品质量 |
| 收稿时间： | 2015-09-14 |
Study on Relationship Between Product Quality and Cavity Pressure Curve |
| |
| Abstract: | The transform regulation of cavity pressure in each injection stage was studied through the cavity pressure data obtained from factorial experiments. The relationship between cavity pressure and product quality in different stages was analyzed. The results demonstrated that product quality had a strong relationship with cavity pressure. Both the increase of cavity pressure in mold filling stage and decline of cavity pressure in cooling stage had influence on product quality while the former being more important. |
| |
| Keywords: | factorial design cavity pressure injection product product quality |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国塑料》浏览原始摘要信息 |
|
点击此处可从《中国塑料》下载全文 |
