首页 | 本学科首页   官方微博 | 高级检索  
     

超宽带低噪声放大器仿真设计
引用本文:王西锋,张英浩,施欢冬,张信民.超宽带低噪声放大器仿真设计[J].雷达与对抗,2011(2):63-66.
作者姓名:王西锋  张英浩  施欢冬  张信民
作者单位:91404部队;南京船舶雷达研究所;
摘    要:采用负反馈技术和集总参数匹配技术,选用VMMK-1218低噪声E-PHEMT晶体管,利用ADS进行仿真优化,设计了一种微波超宽带低噪声放大器。仿真结果显示,在0.5~4.5GHz范围内,放大器增益大于14.2 dB,平坦度小于1.1 dB,噪声系数小于0.85 dB,输入输出反射系数均小于-11 dB。设计结果可应用于各种宽带微波通信及雷达等领域。

关 键 词:低噪声放大器  超宽带  负反馈

The simulation and design of an ultra-wideband low-noise amplifier
WANG Xi-feng,ZHANG Ying-hao,SHI Huan-dong,ZHANG Xin-min.The simulation and design of an ultra-wideband low-noise amplifier[J].Radar & Ecm,2011(2):63-66.
Authors:WANG Xi-feng  ZHANG Ying-hao  SHI Huan-dong  ZHANG Xin-min
Affiliation:WANG Xi-feng1,ZHANG Ying-hao2,SHI Huan-dong2,ZHANG Xin-min2(1.Unit 91404 of the Chinese PLA Navy,Qinhuangdao 066001,China,2.Nanjing Marine Radar Institute,Nanjing 210003)
Abstract:Based on the negative feedback and lumped parameter matching technologies,a microwave ultra-wideband(UWB) low-noise amplifier(LNA) is designed,simulated and optimized through the ADS with the VMMK-1218 low-noise E-PHEMT transistor adopted.The simulation results show that the gain is more than 14.2 dB,the flatness is less than 1.1 dB,the noise factor is less than 0.85 dB,and the input and output reflection coefficient is less than-11 dB within the range of 0.5~4.5 GHz.The LNA can be applied in various fields...
Keywords:low-noise amplifier  ultra wideband  negative feedback  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号