Design Guidelines for Polyethylene Pipe Interface Shear Resistance |
| |
Authors: | ?mer Bilgin Harry E. Stewart |
| |
Affiliation: | 1Assistant Professor, Dept. of Civil and Environmental Engineering, Univ. of Houston, Houston, TX 77204-4003 (corresponding author). E-mail: obilgin@uh.edu 2Associate Professor, School of Civil and Environmental Engineering, Cornell Univ., Ithaca, NY 14853-3501. E-mail: hes1@cornell.edu
|
| |
Abstract: | Polyethylene pipes are commonly used in pipeline systems. Current methods used to determine the pipe pullout capacity do not consider the effects of diameter changes and cyclic movements that the pipelines may experience. Laboratory tests were performed to study the interface shearing resistance of polyethylene pipes under varying conditions. The tests were performed in a temperature-controlled room, where properties were investigated for thermal variations expected in the field. Two types of tests were performed: pull/push tests and cyclic tests. Test results indicated that reductions in pipe diameter affect the interface shear resistance that develops between the pipe and soil. As the pipe diameter gets smaller, the normal contact stresses at the interface decreases, causing a reduction in the interface shearing resistance directly proportional to the normal stress changes. Cyclic pipe movements also cause significant reduction in pipe pullout resistance. The test results indicated that the polyethylene pipe interface shear resistance can be significantly lower than the one determined using the current methods. This paper presents the test results, findings, and design recommendations for the pullout resistance of buried polyethylene pipes. |
| |
Keywords: | Pipeline design Plastic pipes Interfaces Pullout resistance Temperature effects Cyclic strength Cyclic tests |
|
|