Correcting Liquefaction Resistance for Aged Sands Using Measured to Estimated Velocity Ratio |
| |
Authors: | Ronald D. Andrus Hossein Hayati Nisha P. Mohanan |
| |
Affiliation: | 1Associate Professor, Dept. of Civil Engineering, Clemson Univ., Clemson, SC 29634-0911 (corresponding author). E-mail: randrus@clemson.edu 2Graduate Research Assistant, Dept. of Civil Engineering, Clemson Univ., Clemson, SC 29634-0911. 3Project Geotechnical Engineer, Golder Associates Inc., Mt. Laurel, NJ 08054; formerly, Graduate Research Assistant, Dept. of Civil Engineering, Clemson Univ., Clemson, SC 29634-0911.
|
| |
Abstract: | Factors for correcting liquefaction resistance for aged sands using ratios of measured to estimated shear-wave velocity (MEVR) are derived in this paper. Estimated values of shear-wave velocity (VS) are computed for 91 penetration resistance-VS data pairs using previously published relationships. Linear regression is performed on values of MEVR and corresponding average age. Age of the sand layer is taken as the time between VS measurements and initial deposition or last critical disturbance. It is found that MEVR increases by a factor of about 0.08 per log cycle of time, and time equals about 6?years on average when MEVR equals 1 for the recommended penetration resistance-VS relationships. The resulting regression equation is combined with the strength gain equation reported by Hayati et al. 2008 in “Proc., Geotechnical Earthquake Engineering and Soil Dynamics IV,” to produce a MEVR versus deposit resistance correction relationship. This new corrective relationship is applied to create liquefaction resistance curves based on VS, standard penetration test blow count, and cone tip resistance for sands of various ages (or MEVRs). Because age of natural soil deposits is usually difficult to accurately determine, MEVR appears to be a promising alternative. |
| |
Keywords: | Aging Sand Cone penetration tests Earthquakes In situ tests Soil liquefaction Wave velocity Penetration tests |
|
|