二次分型定模抽芯潜伏浇口注射模 |
| |
引用本文: | 钟兴,田福祥,周健波. 二次分型定模抽芯潜伏浇口注射模[J]. 模具制造, 2008, 8(9): 43-44 |
| |
作者姓名: | 钟兴 田福祥 周健波 |
| |
作者单位: | 1. 青岛理工大学机械学院,山东青岛,266033 2. 青岛农业大学机电工程学院 |
| |
摘 要: | 介绍了塑料支架注射模结构,浇注系统的选择及模具工作过程。该模具1模两腔,采用潜伏式浇口,从塑件侧面进料,二次顺序分型,定模抽芯。流道凝料可由浇道推杆推出,同时切断浇口,然后自动落下.经生产使用,该模具各机构活动灵活,操作安全可靠。
|
关 键 词: | 注射模 侧抽芯 潜伏浇口 斜销 |
Design of Injection Mold with Submarine Gate and Twice Cavity Parting and Core-Pulling Mechanism |
| |
Abstract: | This plastic bracket mold was introduced on structure,feeding system ahd operational principle, two-cavity, twice order cavity parting and submarine gate were adopted on this mold feed on the side. There were core-pulling mechanism on the stationary mold. The material left was cut and ejected. The mold was flexible and reliable in operation. |
| |
Keywords: | injection mold side core-pulling submarine gate angle pins |
本文献已被 维普 万方数据 等数据库收录! |
|