首页 | 本学科首页   官方微博 | 高级检索  
     

利用稳态法测量聚合物薄膜纵向热导系数
引用本文:沈斌杰,曾志刚,沈超,胡志宇.利用稳态法测量聚合物薄膜纵向热导系数[J].高分子材料科学与工程,2012(8):121-124.
作者姓名:沈斌杰  曾志刚  沈超  胡志宇
作者单位:上海大学纳微能源研究所
基金项目:科技部国际合作项目(2009DFB60160);上海市科委资助项目(10520710400,10PJ1403800,0852NM01700,08160706000)
摘    要:在一维稳态热传导模型的基础上,设计了一套用于测量聚合物薄膜纵向热导系数的实验装置,并利用Comsol软件对该测量装置进行数值模拟并优化设计。同时利用本文设计的实验装置,测量得到了不同温度下聚酰亚胺(PI)膜、聚四氟乙烯(PTFE)膜以及混合纤维素酯(MCE)膜的热导系数。在35℃~60℃的温度范围内热导系数测量值分别维持在0.21 W/(m.K),0.26 W/(m.K),0.13 W/(m.K)左右,标准不确定度在9.5%以下。测量结果与参考值相符,验证了实验装置的测试精度。

关 键 词:稳态法  聚合物薄膜  热导系数

Steady-State Measurement of Cross-Plane Thermal Conductivity in Thin Polymer Films
Binjie Shen,Zhigang Zeng,Chao Shen,Zhiyu Hu.Steady-State Measurement of Cross-Plane Thermal Conductivity in Thin Polymer Films[J].Polymer Materials Science & Engineering,2012(8):121-124.
Authors:Binjie Shen  Zhigang Zeng  Chao Shen  Zhiyu Hu
Affiliation:(Institute of Nano/Micro Energy,Shanghai University,Shanghai 200444,China)
Abstract:Based on the analysis of one-dimensional heat transfer model,a measuring apparatus for cross-plane thermal conductivity of thin polymer films was designed,which was optimized by simulation analysis.In this paper thermal conductivities of polyimide(PI) membrane,polytetrafluoroethylene(PTFE) membrane and mixed cellulose ester(MCE) membrane were measured to be 0.21 W/(m·K),0.26 W/(m·K),0.13 W/(m·K) respectively at the temperature range of 35 ℃~60 ℃ and the uncertainty was below 9.5%.The experimental results and error analysis are consonant with the numerical calculation,which verifies the measuring accuracy of the designed apparatus.
Keywords:steady-state  polymer film  thermal conductivity
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号