| Abstract: | This paper deals with a dynamic voltage restorer (DVR) characterized by installing the shunt converter at the load side. The DVR can compensate for the load voltage when a voltage sag appears in the supply voltage. An existing DVR requires a large capacitor bank or other energy‐storage elements such as double‐layer capacitors or batteries. The DVR presented in this paper requires only a small DC capacitor intended for smoothing the DC‐link voltage. Moreover, three control methods for the series converter are compared and discussed to reduce the series‐converter rating, paying attention to the zero‐sequence voltages included in the supply voltage and the compensating voltage. Experimental results obtained from a 200‐V, 5‐kW laboratory system are shown to verify the viability of the system configuration and the control methods. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(3): 73–82, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20460 |
