Two‐Phase Sequential Simulation of a Fluidized Bed Reformer

A two‐phase flow model is adapted in order to predict the performance of a fluidized bed reformer using the sequential modular simulator. Since there are physical and chemical phenomena interacting in the reformer, two sub‐models appear to be necessary to describe the overall model. These are the hydrodynamic and reaction sub‐models. The hydrodynamic sub‐model is based on the dynamic two‐phase model and the reaction sub‐model is derived from the literature. In the overall model, the bed is divided into several sections. At each section, the flow of the gas is considered as plug flow through the bubble phase and to be perfectly mixed through the emulsion phase. Two sets of experimental data from the literature at different hydrodynamic regimes were used in order to validate the proposed model. A close agreement was observed between the model predictions and the experimental data. The model proposed in this work may be used as a framework for the development of sophisticated models for non‐ideal reactors inside process simulators.