首页 | 本学科首页   官方微博 | 高级检索  
     


Nanocomposite‐Beschichtungen auf CBN‐Werkzeugen
Authors:H Frank  S Reich
Affiliation:GFE Schmalkalden e.V., D‐98574 Schmalkalden, N?herstiller Str. 10
Abstract:Nanocomposite coatings on CBN‐tools CBN (cubic boron nitride) cutting materials are often used to improve the properties of cutting tools. This allows new applications and processes, which are not possible with common cutting materials (e.g. hard metals). Today CBN cutting materials are mostly coated to estimate the wear by an optical evaluation. Coatings on CBN cutting materials for enhancement of the tribological properties are normally not used. For improvement of the properties of used CBN tools during the cutting process a coating technology was developed. This technology combines the advantages of CBN cutting materials with the excellent properties (e.g. hardness, temperature stability) of nanostructured materials. Investigations with different coating systems and pre‐treatment processes were done to test the CBN cutting tools. These investigations have been shown, that nanocomposite coatings can be used to enhance the tool life of CBN cutting tools. Important for an increase in the tool life is a very good coating adhesion, which can be reached by special adhesion layers and an optimized coating structure.
Keywords:CBN‐Werkzeuge  Nanocomposite‐Schichten  Haftvermittler‐schichten  Arc‐PVD  Schneidkantenprä  paration  CBN‐tools  nanocomposite coatings  adhesion layers  arc‐PVD  cutting edge pre‐treatment
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号