Pseudo-V2 control with adaptive compensation for fast-transient current-mode buck converter |
| |
Affiliation: | 1. Mar Baselios Christian College of Engineering and Technology, Peermade, Kerala, India;2. Centre for Research Initiatives in Science and Engineering, MBC College of Engineering and Technology, Peermade, Kerala, India;3. Saintgits College of Engineering, Kottayam, Kerala, India |
| |
Abstract: | A type of pseudo-V2 control, with on-chip adaptive compensation to achieve fast transient (FT) response for current mode DC–DC buck converter, has been proposed and simulated using 0.18 μm CMOS technology in this paper. Based on a new on-chip capacitor multiplier, adaptive compensation is achieved by making the compensation capacitance to track the load current. The proposed pseudo-V2 control utilizes the output ripple to determine the duty cycle during load transient. Thus the overshoot/undershoot voltage and the transient recovery time are effectively reduced. Simulation results demonstrate the transient ripple is smaller than 50 mV and the transient recovery time is shorter than 10 μs for a 450 mA load current step. The maximum power conversion efficiency is 94.6% at 1 MHz switching frequency when input and output voltages are 5 V and 1.8 V, respectively. |
| |
Keywords: | Fast transient Adaptive compensation Capacitor multiplier Buck converters |
本文献已被 ScienceDirect 等数据库收录! |
|