Microstructure and Mechanical Properties of Al356/SiCp Cast Composites Fabricated by a Novel Technique

In this study, SiC_p containing composite powders were used as the reinforcement carrier media for manufacturing cast Al356/5 vol.% SiC_p composites. Untreated SiC_p, milled particulate Al-SiC_p composite powder, and milled particulate Al-SiC_p-Mg composite powder were injected into Al356 melt. The resultant composite slurries were then cast from either a fully liquid state (stir casting) or semisolid state (compocasting). The results revealed that by injection of composite powders, the uniformity of the SiC_p in the Al356 matrix was greatly improved, the particle-free zones in the matrix were disappeared, the SiC particles became smaller, the porosity was decreased, and the matrix microstructure became finer. Compocasting changed the matrix dendritic microstructure to a finer non-dendritic one and also slightly improved the distribution of the SiC_p. Simultaneous utilization of Al-SiC_p-Mg composite powder and compocasting method increased the macro- and micro-hardness, impact energy, bending strength, and bending strain of Al356/SiC_p composite by 35, 63, 20, 20, and 40%, respectively, as compared with those of the composite fabricated by injection of untreated SiC_p and stir casting process.