| 基于PRO/E二次开发的150t液压打包机压头参数化设计 |
| |
| 引用本文： | 阮景能,贺元成.基于PRO/E二次开发的150t液压打包机压头参数化设计[J].机械管理开发,2012(6):3-5. |
| |
| 作者姓名： | 阮景能 贺元成 |
| |
| 作者单位： | 四川理工学院机械工程学院,四川 自贡,643000 |
| |
| 基金项目： | 四川省重点实验室基金资助项目（GK201005）;四川理工学院研究生创新基金资助项目（y2010003）. |
| |
| 摘 要： | 讲述了三维零件参数化设计的概念、步骤和方法,在Pro/E的开发平台上利用Microsoft Visual Studio2005和Pro/Toolkit工具包进行二次开发。采用参数化设计的思路与方法对150t液压打包机的压头进行参数化建模,缩短了设计周期,提高了工作效率,为设计人员提供了极大的便利。
|
| 关 键 词： | Pro/E 二次开发 液压打包机压头 参数化设计 |
Parametric Design Based on Secondary Development of Pro/E for the Indenter of 150t Packing Machine |
| |
| RUAN Jing-neng
,
HE Yuan-cheng.Parametric Design Based on Secondary Development of Pro/E for the Indenter of 150t Packing Machine[J].Mechanical Management and Development,2012(6):3-5. |
| |
| Authors: | RUAN Jing-neng HE Yuan-cheng |
| |
| Affiliation: | (School of Mechanical Engineering ,Sichuan University of Science ＆ Engineering, Zigong 643000,China) |
| |
| Abstract: | This paper introduces the concept, procedures and methods for 3D parametric design, using Microsoft Visual Studio 2005 and Pro/ Toolkit to carry out secondary development based on Pro/E development platform. Designing the indenter of 150t packing machine based on the method and an idea of parametric design, this approach shortened the design periods, improved design efficiency and the quality as well as provide a great convenience for design personnel. |
| |
| Keywords: | Pro/E secondary development indenter of hydraulic machine parametric design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
