| 超声波加工参数的实验研究 |
| |
| 引用本文： | 刘垚.超声波加工参数的实验研究[J].机械管理开发,2012(6):14-15. |
| |
| 作者姓名： | 刘垚 |
| |
| 作者单位： | 山西大学工程学院,山西太原,030013 |
| |
| 摘 要： | 超声波加工己被证明是陶瓷、金刚石、半导体等硬脆性材料加工的有效方法,但其加工效率不高制约着它的广泛应用。因此根据超声波加工材料去除率模型,对磨料粒度、静载荷等加工参数进行探讨,可得出各加工参数对材料去除率的影响。
|
| 关 键 词： | 超声波加工 磨料 静载荷 加工效率 |
Experimental Study of Ultrasonic Machining Parameters |
| |
| LIU Yao.Experimental Study of Ultrasonic Machining Parameters[J].Mechanical Management and Development,2012(6):14-15. |
| |
| Authors: | LIU Yao |
| |
| Affiliation: | LIU Yao (Engineering College of Shanxi University, Taiyuan 030013, China) |
| |
| Abstract: | Ultrasonic machining has been proved to be an effective way of machining hard and brittle materials such as ceramics, diamond, and semiconductor. But the machining efficiency is so low that limits its wide application. According to the material removal rate model of ultrasonic machining, therefore, we study the ultrasonic machining parameters of the abrasive particles, static load, etc. and confirm the impact of various parameters on material removal rate. |
| |
| Keywords: | ultrasonic machining abrasive static load machining efficiency |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
