| 在普通车床上加工小孔多线渐开线螺旋内花键 |
| |
| 引用本文： | 张珂,王生泽,张小亮.在普通车床上加工小孔多线渐开线螺旋内花键[J].工具技术,2002,36(10):35-36. |
| |
| 作者姓名： | 张珂 王生泽 张小亮 |
| |
| 作者单位： | 1. 东华大学
2. 中国一拖集团有限公司 |
| |
| 摘 要： | 提出一种在普通车床上加工小孔多线渐开线螺旋内花键的工艺方法 ,介绍了导程计算、花键分线、主轴降速、刀具刃形计算及装刀等方法
|
| 关 键 词： | 螺旋内花键 渐开线 车削加工 |
Machining Multi-thread Involute Internal Helix Spline with Small Hole on Common Lathe |
| |
| Zhang Ke,Wang Shengze,Zhang Xiaoliang.Machining Multi-thread Involute Internal Helix Spline with Small Hole on Common Lathe[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2002,36(10):35-36. |
| |
| Authors: | Zhang Ke Wang Shengze Zhang Xiaoliang |
| |
| Affiliation: | Zhang Ke Wang Shengze Zhang Xiaoliang |
| |
| Abstract: | A technology of machining multi thread involute internal helix spline with small hole on the common lathe is presented, and some methods such as calculating the lead, dividing the thread, decreasing the speed of lathe mainshaft, calculating the profile of cutting edge, mounting the cutter and etc. are introduced. |
| |
| Keywords: | internal helix spline involute turning machining |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
