| 电脑—探针微孔测量方法研究 |
| |
| 引用本文： | 金长善 徐兴中. 电脑—探针微孔测量方法研究[J]. 哈尔滨工业大学学报, 1991, 0(1): 40-44 |
| |
| 作者姓名： | 金长善 徐兴中 |
| |
| 作者单位： | 哈尔滨工业大学精密仪器系，哈尔滨工业大学精密仪器系，哈尔滨工业大学精密仪器系，哈尔滨工业大学精密仪器系 教授 |
| |
| 摘 要： | 本文讨论了微孔自动化测量装置的原理与结构。电接触探针在微机控制下,在X方向找中心,在Y方向进行孔径测量。该系统不仅能实现测量过程自动化和测量结果自动显示,而且能自动消除测量工作台丝杠螺母反向间隙对测量精度的影响。
|
| 关 键 词： | 微机控制 探针 小孔 测量 微孔器件 |
An Approach to Microcomputer Controlled Touch Needle Pinhole Measurement System |
| |
| Jin Changhan Xu Xingzhong Yu Fengming Wang Guisheng. An Approach to Microcomputer Controlled Touch Needle Pinhole Measurement System[J]. Journal of Harbin Institute of Technology, 1991, 0(1): 40-44 |
| |
| Authors: | Jin Changhan Xu Xingzhong Yu Fengming Wang Guisheng |
| |
| Affiliation: | Jin Changhan Xu Xingzhong Yu Fengming Wang Guisheng |
| |
| Abstract: | A microcomputer controlled pinhole measurement system is discussed in the paper. Microcomputer controlled electro-contact touch needle is used to find center of the hole in X orientation and measure diameter in Y orientation. The system is not only capable of measuring and displying automatically, but also eliminating the screw-nut gaps arised in reversing. |
| |
| Keywords: | Microcomputer controlled touch needle pinhole measurement |
| 本文献已被 CNKI 维普 等数据库收录！ |
