| 层压减振复合钢板拉伸剪切破断区的XPS分析 |
| |
| 引用本文： | 王成国,孙希泰,刘旭刚,朱静,蔡其巩. 层压减振复合钢板拉伸剪切破断区的XPS分析[J]. 山东大学学报(工学版), 1995, 0(2) |
| |
| 作者姓名： | 王成国 孙希泰 刘旭刚 朱静 蔡其巩 |
| |
| 作者单位： | 冶金工业部钢铁研究总院，山东工业大学材料科学与工程学院 |
| |
| 摘 要： | 选用Ｃ１ｓ，Ｃｌ１ｓ，Ｎ１ｓ等信号作为ＸＰＳ（Ｘ射线光电子港法）分析信号，对酚醛树脂氯丁胶和聚氨酯胶为夹层的层压减振复合钢板的拉伸剪切破断区分别进行测试分析．结果发现，破断区的分析信号强度小于高聚物的、大于钢板的分析信号强度；层压减振复合钢板的拉伸剪切破坏不是发生在钢板与高聚物的界面上，而是在亚界面层内破坏．
|
| 关 键 词： | 化学分析电子谱法；固体－固体界面；拉剪切试验 |
XPS ANALYSIS OF TENSILE SHEAR FAILURE ZONE OF VIBRATION DAMPING LAMINATED STEEL SHEET |
| |
| Wang Chengguo, Sun Xitai,Liu Xugang et al. XPS ANALYSIS OF TENSILE SHEAR FAILURE ZONE OF VIBRATION DAMPING LAMINATED STEEL SHEET[J]. Journal of Shandong University of Technology, 1995, 0(2) |
| |
| Authors: | Wang Chengguo Sun Xitai Liu Xugang et al |
| |
| Abstract: | Selects C1s,Cl1s,and N1s signals as XPS analyzing signal, studies the tensile shear failure of vibration damping laminated steel sheet using respectivily phenolic resin-chloroprene rubber polymer and polyurethane as sandwiched layer. The results indicate that intensity of analyzing signal of the failure zone is smaller than that of the high polymer, larger than that of the steel sheet. The tensile shear failure of vibration damping laminated steel sheet occurs at the sub-interface layer rather than the interface of ploymer-steel sheet. |
| |
| Keywords: | Electron spectroscopy for chemical analysis3 Solid-solid interfaces Tensile-shear tests. |
| 本文献已被 CNKI 等数据库收录！ |
