| 钛增强Cu40Zn黄铜合金的粉末冶金制备及其力学性能 |
| |
| 引用本文： | 马晨,张鑫,潘登,郑飞洋,李树丰.钛增强Cu40Zn黄铜合金的粉末冶金制备及其力学性能[J].材料研究学报,2020,34(2):101-108. |
| |
| 作者姓名： | 马晨 张鑫 潘登 郑飞洋 李树丰 |
| |
| 作者单位： | 西安理工大学材料科学与工程学院 西安 710048 |
| |
| 摘 要： | 采用粉末冶金法将合金元素Ti加到Cu40Zn基体中制备钛黄铜，研究了Ti的添加量对黄铜微观组织、界面结构、相组成以及力学性能的影响。结果表明：Ti在基体中固溶析出并与Cu40Zn反应生成了亚微米级的Cu2Ti4O颗粒和Ti纳米团簇，随着Ti含量的提高钛黄铜的屈服强度、抗拉强度和硬度呈提高的趋势。增大位错运动阻力产生的第二相强化、钉扎产生的细晶强化以及加工硬化，使Cu40Zn的力学性能提高。综合性能良好的Cu40Zn-1.9Ti，其屈服强度、抗拉强度、延伸率和硬度分别达到375 MPa、602 MPa、17.7%和163HV。
|
| 关 键 词： | 金属材料 粉末冶金 黄铜合金 钛 力学性能 纳米析出相 |
| 收稿时间： | 2019-10-16 |
Fabrication and Mechanical Properties of Ti-Reinforced Cu40Zn Brass Alloy via Powder Metallurgy |
| |
| MA Chen,ZHANG Xin,PAN Deng,ZHENG Feiyang,LI Shufeng.Fabrication and Mechanical Properties of Ti-Reinforced Cu40Zn Brass Alloy via Powder Metallurgy[J].Chinese Journal of Materials Research,2020,34(2):101-108. |
| |
| Authors: | MA Chen ZHANG Xin PAN Deng ZHENG Feiyang LI Shufeng |
| |
| Abstract: | High strength Ti-reinforced Cu40Zn brass alloy was prepared by powder metallurgy. The effect of Ti addition on the microstructure, interfacial structure, phase composition and mechanical properties of the brass was investigated. Results show that Ti exists in Cu40Zn matrix as sub-micron Cu2Ti4O particles and Ti nanoclusters, which can significantly improve the mechanical properties of Cu40Zn by means of second-phase strengthening, fine-grain strengthening and processing hardening. Cu40Zn-1.9Ti has good comprehensive performance: the yield strength, tensile strength, elongation at break and hardness are 375 MPa, 602 MPa, 17.7% and 163 HV respectively. |
| |
| Keywords: | metallic materials powder metallurgy brass alloy titanium mechanical properties nano precipitates |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《材料研究学报》浏览原始摘要信息 |
|
点击此处可从《材料研究学报》下载全文 |
