| 变速切削系统的振动响应特征 |
| |
| 引用本文： | 王文才,于骏一,周晓勤,傅连宇.变速切削系统的振动响应特征[J].吉林大学学报(工学版),1996(4). |
| |
| 作者姓名： | 王文才 于骏一 周晓勤 傅连宇 |
| |
| 作者单位： | 机械工程系 |
| |
| 基金项目： | 国家自然科学基金和国家教委博士点基金资助项目 |
| |
| 摘 要： | 研究了变速切削系统的振动响应特征，理论分析和实验结果均表明，在发生再生型颤振时，变速切削系统的振动响应和动态切削力的频率随时间的变化规律和机床主轴转速随时间的变化规律相同；动态切削力为一宽频的激励信号，振动响应为一窄带的响应信号；动态切削力和振动响应的包络变动周期与机床主轴的变动周期相同
|
| 关 键 词： | 变速切削系统 振动响应 稳定性 |
Behavior of Dynamic Response in Variable Speed Cutting |
| |
| Wang Wencai,Yu Junyi,Zhou Xiaoqin,Fu Lianyu.Behavior of Dynamic Response in Variable Speed Cutting[J].Journal of Jilin University:Eng and Technol Ed,1996(4). |
| |
| Authors: | Wang Wencai Yu Junyi Zhou Xiaoqin Fu Lianyu |
| |
| Affiliation: | Dept of Mechanical Engineering |
| |
| Abstract: | This paper discusses the behavior of dynamic response in the variable speed cutting. Both theoretical analysis and experimental results show that, when regenerative chatter occurs in the variable speed cutting, the frequency of dynamic cutting force and vibratory response varies in the same way as spindle speed does. The dynamic cutting force is an exciting signal of the wide frequency range and the vibratory response is of the narrow frequency range. The envelope curves of dynamic cutting force and vibrtory response are periodic signals whose period is equal to that of the spindle speed variation. |
| |
| Keywords: | varialbe speed cutting system dynamic response stability |
| 本文献已被 CNKI 等数据库收录！ |
