首页 | 本学科首页   官方微博 | 高级检索  
     

数字化变电站过程层仿真测试环境的开发与设计
引用本文:殷南南,胡敏强,窦晓波.数字化变电站过程层仿真测试环境的开发与设计[J].江苏电机工程,2010,29(2):1-5.
作者姓名:殷南南  胡敏强  窦晓波
作者单位:东南大学电气工程学院,江苏,南京,210096
摘    要:数字化变电站过程层仿真测试环境主要由硬件仿真装置和配置系统两部分组成。主要用来模拟智能断路器和电子互感器的通信特征,该装置不只仿真单个间隔的过程层设备,不仅对单台保护测控装置进行测试,而是仿真某一电压等级的多个过程层设备,对由大量装置组成的变电站自动化系统进行整体功能和性能的检测,实现对变电站设备系统测试操作;还可以通过一定的算法模拟故障动态过程,产生相应数据,并下载到测试装置内发送采样值报文和GOOSE报文,便可再现动态故障过程,构建一个系统测试环境。

关 键 词:数字化变电站  过程层  仿真测试

Development and Design of Simulation Test Environment for Digital Substation Process Level
YIN Nan-nan,HU Min-qiang,DOU Xiao-bo.Development and Design of Simulation Test Environment for Digital Substation Process Level[J].Jiangsu Electrical Engineering,2010,29(2):1-5.
Authors:YIN Nan-nan  HU Min-qiang  DOU Xiao-bo
Affiliation:YIN Nan-nan,HU Min-qiang,DOU Xiao-bo(Southeast University,Nanjing 210096,China)
Abstract:Simulation testing environment for digital substation process level is mainly consisted of hardware simulation device and configure system.It can simulate the corresponding character of intelligent circuit breaker and EVT/ECT.The device can not only simulate one device of single bay and examine the performance of one protection device,but also can simulate many devices of some voltage level,and check out the entire function of SAS that covers lots of equipments.In addition,it can simulate the dynamic fault ...
Keywords:process level  test environment  emulational test  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号