| 直流输电换流阀晶闸管级阻抗测试系统设计 |
| |
| 引用本文： | 王维,高东方,唐宗军. 直流输电换流阀晶闸管级阻抗测试系统设计[J]. 沈阳工业大学学报, 2005, 27(5): 488-492. DOI: 10.7688/j.issn.1000-1646.2020.05.02 |
| |
| 作者姓名： | 王维 高东方 唐宗军 |
| |
| 作者单位： | 国网四川省电力公司 a. 电力科学研究院, b. 特高压宜宾管理处, 成都 610072 |
| |
| 基金项目： | 国家自然科学基金项目(51807154);国家电网有限公司科技项目(52199718000W) |
| |
| 摘 要： | 为了满足高压直流输电换流阀晶闸管级阻尼回路阻抗现场测试的需要,基于STM32F4ZGT6控制器的高精度参考电阻自动切换技术,提出了一种晶闸管级阻抗快速检测方法,并设计了测试系统的高频正弦信号产生模块、高精度基准电阻选择切换模块、电压信号调理采集模块和STM32控制模块.将晶闸管级阻抗测试系统应用于特高压换流阀晶闸管级的阻抗检测与结果判定.结果表明,阻抗测量误差小于5%,满足现场工程应用需求.
|
| 关 键 词： | 高压直流输电 换流阀 晶闸管级 例行试验 均压阻尼回路 阻抗模值 基准电阻 STM32模块 |
| 文章编号： | 1000-1646（2005）05-0488-03 |
| 收稿时间： | 2004-06-14 |
| 修稿时间： | 2004-06-14 |
Tool abrasion monitoring system based on 80C196KC microcontroller |
| |
| WANG Wei,GAO Dong-fang,TANG Zong-jun. Tool abrasion monitoring system based on 80C196KC microcontroller[J]. Journal of Shenyang University of Technology, 2005, 27(5): 488-492. DOI: 10.7688/j.issn.1000-1646.2020.05.02 |
| |
| Authors: | WANG Wei GAO Dong-fang TANG Zong-jun |
| |
| Affiliation: | a. Electric Power Research Institute, b. UHV Yibin Administrative Office, State Grid Sichuan Electric Power Corporation, Chengdu 610072, China |
| |
| Abstract: | The on-line monitoring system of cutting tool abrasion in milling process is studied in this(paper).This system is composed of 80C196KC chip,ROM,RAM,expanded I/O interface,LCD crystal(displayer) and keyboard etc.RS232 interface is adopted to realize the serial communication with upper PC.The(concrete) PTS operation to perform A/D conversion is discussed,in which the set of sampling time,choice of sampling channel and corresponding interrupt request etc are concluded.Software of monitoring system is programmed and the functions of related sub-modules are introduced. |
| |
| Keywords: | milling cutter cutting tool abrasion monitoring system microcontroller serialcommunication |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《沈阳工业大学学报》浏览原始摘要信息 |
|
点击此处可从《沈阳工业大学学报》下载全文 |
