| 以控制打滑为目标的取向硅钢可逆轧制工艺优化 |
| |
| 引用本文： | 刘忠诚,王永亮,安俊博,杨亚晴. 以控制打滑为目标的取向硅钢可逆轧制工艺优化[J]. 轧钢, 2007, 24(1): 42-44. DOI: 10.13228/j.boyuan.issn1003-9996.20190004 |
| |
| 作者姓名： | 刘忠诚 王永亮 安俊博 杨亚晴 |
| |
| 作者单位： | 1.鞍钢集团钢铁研究院，辽宁鞍山114009；2.鞍钢股份冷轧硅钢厂，辽宁鞍山114009 |
| |
| 摘 要： | 在引入打滑因子的基础上，以控制打滑为目标，提出了基于非线性规划法的取向硅钢可逆轧制工艺优化方法。在综合考虑取向硅钢冷轧工艺参数设定原则的前提下，对可行域内目标函数进行寻优，确定最优轧制规程。优化结果表明，采用非线性规划法优化的轧制规程符合取向硅钢冷轧生产设备及工艺要求，能够较好地反映冷轧工艺参数对轧制过程中打滑现象的影响，为实际生产中打滑现象的防治提供了依据。
|
| 关 键 词： | 打滑因子 取向硅钢 非线性规划法 目标函数 |
| 文章编号： | 1003-9996(2007)01-0042-03 |
| 修稿时间： | 2006-06-26 |
Research of Automatic Correcting Deviation System Used in Continuous Annealing Furnace of Cold Rolled Strip |
| |
| LIU Zhong-cheng,WANG Yong-liang,An Jun-bo,YANG Ya-qing. Research of Automatic Correcting Deviation System Used in Continuous Annealing Furnace of Cold Rolled Strip[J]. Steel Rolling, 2007, 24(1): 42-44. DOI: 10.13228/j.boyuan.issn1003-9996.20190004 |
| |
| Authors: | LIU Zhong-cheng WANG Yong-liang An Jun-bo YANG Ya-qing |
| |
| Affiliation: | 1.Iron and Steel Research Institute,AnSteel Group Corporation,Anshan 114009,China;2.Cold Rolled Silicon Steel Plant,Angang Steel Company Limited,Anshan 114009,China |
| |
| Abstract: | The installment, sortment and composition of automatic correcting deviation system used in continuous annealing furnace of cold rolled strip were described. Meanwhile, the theory of correcting deviation process was introduced. |
| |
| Keywords: | cold rolled strip continuous annealing furnace correcting deviation system |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《轧钢》浏览原始摘要信息 |
|
点击此处可从《轧钢》下载全文 |
