| 高剪压比钢筋混凝土框架夹心节点抗震性能研究 |
| |
| 引用本文： | 李英民 刘建伟 郑清 夏洪流 赵腾飞 江正. 高剪压比钢筋混凝土框架夹心节点抗震性能研究[J]. 土木建筑与环境工程, 2007, 29(4): 44 |
| |
| 作者姓名： | 李英民 刘建伟 郑清 夏洪流 赵腾飞 江正 |
| |
| 作者单位： | [1]重庆大学土木工程学院,重庆400045 [2]成都基准方中建筑设计事务所,成都610017 |
| |
| 摘 要： | 完成了7个高剪压比钢筋混凝土框架夹心节点试件的低周交变荷载试验，试验过程中夹心节点试件表现出较好的受力、变形、耗能性能和较高的位移延性，多数试件因节点剪切破坏失效，没出现核心区受压破坏的情况。虽然夹心节点的某些性能如梁筋的粘结滑移性能等相对传统节点更为不利，但其综合性能仍然能够满足结构抗震设计的要求。
|
| 关 键 词： | 夹心节点 抗震性能 位移延性 失效模式 钢筋粘结滑移 |
| 修稿时间： | 2007-01-11 |
Seismic Load Tests on Reinforced Concrete Beam-Column Sandwich Joints with High Shear Stress |
| |
| LI Ying-min,LIU Jian-wei,ZHENG qing,XIA Hong liu,ZHAO Teng-fei,JIANG Zheng. Seismic Load Tests on Reinforced Concrete Beam-Column Sandwich Joints with High Shear Stress[J]. Journal of Civil,Architectrual & Environment Engineering, 2007, 29(4): 44 |
| |
| Authors: | LI Ying-min LIU Jian-wei ZHENG qing XIA Hong liu ZHAO Teng-fei JIANG Zheng |
| |
| Affiliation: | 1. College of Civil Engineering,Chongqing University,Chongqing 400045, P. R. China; 2. Chengdu Jizhunfangzhong Architects As sociates, Chengdu 610017, P. R. China |
| |
| Abstract: | Seven reinforced concrete Beam-Column sandwich joint specimens were tested under cyclic load. The performances of these specimens consisting of loads resistance, deflection, ductility, displacement, energy dissipation could satisfy the requirement of structures for seismic design. The phenomena that concrete in joint region was crushed by axial load or eccentric load were never observed,and final failure for a multitude of specimens occurred by shear force. Though a few of performances such as beam bar anchorage capacity were not as well as those of traditional joints ,it is feasible for sandwich joints used while establishing structures. |
| |
| Keywords: | sandwich joints seismic resistant performance ductility failure mode beam bar anchorage capacity |
|
| 点击此处可从《土木建筑与环境工程》浏览原始摘要信息 |
|
点击此处可从《土木建筑与环境工程》下载全文 |
