| DEVELOPMENT OF FRASTA SIMULATION SOFTWARE |
| |
| 作者姓名： | Y.G. Cao K. Tanaka |
| |
| 作者单位： | Deparment of Mechanical Systems Engineering, Toyama Prefectural University, Toyama 939-0398, Japan |
| |
| 摘 要： | Fracture-surface topography analysis （FRASTA） was successfully used to simulate the process of crack and calculate parameters of crack such as the crack opening angle （COA） and crack-tip opening angle （CTOA）. But because the amount of calculation is large, errors are often made during the course of calculation. FRASTA simulation software, namely fracture surface analyst （FSA ） is developed and a series of center-cracked tension （CCT） and double edge notched （DEN） specimens of different materials with different sizes are tested, their fracture surfaces are scanned by non-contact 319 scanning system and the elevation data of the fracture surfaces is recorded. FSA used the recorded elevation data of fracture surfaces to simulate the process of crack based on the principle of FRASTA. Results show that FSA can accurately simulate the process and calculate the parameters of crack.
|
| 关 键 词： | 裂纹张开角 FRASTA COA CTOA 模拟软件 |
| 收稿时间： | 2005-11-21 |
DEVELOPMENT OF FRASTA SIMULATION SOFTWARE |
| |
| Y.G. Cao K. Tanaka.DEVELOPMENT OF FRASTA SIMULATION SOFTWARE[J].Acta Metallurgica Sinica(English Letters),2006,19(3):165-170. |
| |
| Authors: | YG Cao K Tanaka |
| |
| Affiliation: | Department of Mechanical Systems Engineering, Toyama Prefectural University, Toyama 939-0398, Japan |
| |
| Abstract: | Fracture-surface topography analysis (FRASTA) was successfully used to simulate the process of crack and calculate parameters of crack such as the crack opening angle (COA) and crack-tip opening angle (CTOA). But because the amount of calculation is large, errors are often made during the course of calculation. FRASTA simulation software, namely fracture surface analyst (FSA) is developed and a series of center-cracked tension (CCT) and double edge notched (DEN) specimens of different materials with different sizes are tested, their fracture surfaces are scanned by non-contact 3D scanning system and the elevation data of the fracture surfaces is recorded. FSA used the recorded elevation data of fracture surfaces to simulate the process of crack based on the principle of FRASTA. Results show that FSA can accurately simulate the process and calculate the parameters of crack. |
| |
| Keywords: | FRASTA (fracture-surface topography analysis) COA (crack openingangle) CTOA (crack-tip opening angle) CCT (center-crackedtension) DEN (double edge notched) |
| 本文献已被 CNKI 维普 万方数据 ScienceDirect 等数据库收录！ |
| 点击此处可从《金属学报(英文版)》浏览原始摘要信息 |
|
点击此处可从《金属学报(英文版)》下载全文 |
