| 聚砜碱性蓄电池壳的研制 |
| |
| 引用本文： | 张甲敏,郭红霞.聚砜碱性蓄电池壳的研制[J].工程塑料应用,2006,34(6):36-38. |
| |
| 作者姓名： | 张甲敏 郭红霞 |
| |
| 作者单位： | 河南科技学院化工系,新乡,453003;河南机电高等专科学校,新乡,453002 |
| |
| 摘 要： | 介绍特种工程塑料聚砜(PSU)的特性,采用注射成型工艺制备了碱性蓄电池壳体、壳盖。研究表明,在对成型工艺参数、制品设计优化的基础上,选用特性粘度为0.45～0.55dL/g的PSU,采用多级注射成型工艺,可制得性能完全合乎使用要求的碱性蓄电池壳体、壳盖,满足了军用装备的需要。
|
| 关 键 词： | 聚砜 碱性蓄电池 壳体 壳盖 |
| 收稿时间： | 2006-03-23 |
| 修稿时间： | 2006年3月23日 |
DEVELOPMENT OF PSU SHELL FOR ALKALINE STORAGE BATTERY |
| |
| Zhang Jiamin,Guo Hongxia.DEVELOPMENT OF PSU SHELL FOR ALKALINE STORAGE BATTERY[J].Engineering Plastics Application,2006,34(6):36-38. |
| |
| Authors: | Zhang Jiamin Guo Hongxia |
| |
| Affiliation: | 1. Chemical Engineering Department, Henan Institute of Science and Technology, Xinxiang 453003, China;2.Henan Mechanical and Electrical Engineering College, Xinxiang 453002, China |
| |
| Abstract: | The characteristics of particular engineering plastics polysulfone(PSU) are presented, and the PSU shell body and cover of alkaline storage battery are formed by injection molding. Results show that based on the optimized molding engineering parameters and product designs, the desired products which satisfy the requirements of military equipment can be obtained by using PSU of intrinsic viscosity 0.45-0.55 dL/g and adopting multistage injection molding processing. |
| |
| Keywords: | polysulfone alkaline storage battery shell body shell cover |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
