| 转位式硬质合金不铲齿成形铣刀设计计算 |
| |
| 引用本文： | 刘杰华. 转位式硬质合金不铲齿成形铣刀设计计算[J]. 机械科学与技术, 2001, 20(2): 264-265 |
| |
| 作者姓名： | 刘杰华 |
| |
| 作者单位： | 湛江海洋大学工程学院!广东湛江524025 |
| |
| 摘 要： | 本文提出了一种转位式硬质合金不铲齿成形铣刀的结构 ,并对其刀刃廓形的设计计算方法进行了推导 ,使得该种结构的硬质合金成形铣刀的设计与制造成为可能。
|
| 关 键 词： | 可转位 硬质合金 不铲齿成形铣刀 |
| 文章编号： | 1003-8728(2001)02-0264-02 |
| 修稿时间： | 1999-09-01 |
A Carbide Forming Milling Cutter with New Structure and Its Design Procedure |
| |
| LIU Jie-hua. A Carbide Forming Milling Cutter with New Structure and Its Design Procedure[J]. Mechanical Science and Technology for Aerospace Engineering, 2001, 20(2): 264-265 |
| |
| Authors: | LIU Jie-hua |
| |
| Abstract: | The paper give out a new structure of carbide non-relieved milling cutter and its design procedures. It makes the design and manufacture of this kind of carbide forming milling cutter become possible. |
| |
| Keywords: | Turn-bite Carbide Non-relieved milling cutter |
| 本文献已被 CNKI 维普 等数据库收录！ |
