| 用水蒸气作冷却润滑剂的切削试验研究 |
| |
| 引用本文： | 韩荣第,胡广义. 用水蒸气作冷却润滑剂的切削试验研究[J]. 现代制造工程, 2003, 0(4): 12-13 |
| |
| 作者姓名： | 韩荣第 胡广义 |
| |
| 作者单位： | 哈尔滨工业大学机械工程系422信箱,150001 |
| |
| 摘 要： | 研制水蒸气发生器 ,并用水蒸气作为冷却润滑剂进行切削试验时发现 ,切削力可比干切减少 10 %左右 ,比用乳化液减少 6%左右 ,并初步分析水蒸气作冷却润滑剂的作用机理
|
| 关 键 词： | 干式切削 水蒸气 冷却润滑剂 |
| 文章编号： | 1671-3133(2003)04-0012-02 |
| 修稿时间： | 2003-01-09 |
Experimental investigation of cutting with water vapor as cooling lubricant |
| |
| Han Rongdi,Hu Guangyi. Experimental investigation of cutting with water vapor as cooling lubricant[J]. Modern Manufacturing Engineering, 2003, 0(4): 12-13 |
| |
| Authors: | Han Rongdi Hu Guangyi |
| |
| Abstract: | In view of the fact that water vapor doesn't cause pollution,cutting tests were carried out with water vapor as cooling lubricant,which came from a generator developed by the author.The results show that cutting force with water vapor has reduced by 10 percent in comparison with that without any cooling lubricant,and by 6 percent in comparison with that with emulsion.In this paper,the cooling and lubricating mechanism of water vapor is analyzed. |
| |
| Keywords: | Dry cutting Water vapor Cooling lubricant |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
