| 脉冲爆震发动机推力测试方法分析与比较 |
| |
| 引用本文： | 郑龙席,严传俊,范玮,李牧,王治武. 脉冲爆震发动机推力测试方法分析与比较[J]. 测控技术, 2006, 25(4): 37-41 |
| |
| 作者姓名： | 郑龙席 严传俊 范玮 李牧 王治武 |
| |
| 作者单位： | 西北工业大学,动力与能源学院,陕西,西安,710072;西北工业大学,动力与能源学院,陕西,西安,710072;西北工业大学,动力与能源学院,陕西,西安,710072;西北工业大学,动力与能源学院,陕西,西安,710072;西北工业大学,动力与能源学院,陕西,西安,710072 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 针对脉冲爆震发动机瞬时推力、平均推力测量问题,介绍了直接测量法和间接测量法(包括推力壁压力曲线积分法和抛物摆法)的测量原理及系统构成.分析指出各种测量方法的优缺点及适用范围.提出了弹簧-质量-阻尼系统法,设计了基于该方法的推力测试台架系统,应用该方法对一50 mm内径脉冲爆震发动机的推力进行了测量,得到了合理的结果.对基于不同方法的推力测试台架的结构设计及系统组成提出了建议.
|
| 关 键 词： | 脉冲爆震发动机 推力 测量 |
| 文章编号： | 1000-8829(2006)04-0037-05 |
| 收稿时间： | 2005-06-09 |
| 修稿时间： | 2005-06-09 |
Analysis and Comparison of Pulse Detonation Engine Thrust Measuring Methods |
| |
| ZHENG Long-xi,YAN Chuan-jun,FAN Wei,LI Mu,WANG Zhi-wu. Analysis and Comparison of Pulse Detonation Engine Thrust Measuring Methods[J]. Measurement & Control Technology, 2006, 25(4): 37-41 |
| |
| Authors: | ZHENG Long-xi YAN Chuan-jun FAN Wei LI Mu WANG Zhi-wu |
| |
| Abstract: | Transient and average thrust are two important performance parameters of pulse detonation engine.The principle and system structure of direct measurement method and indirect measurement methods(including thrust wall pressure integral method and ballistic pendulum method) are introduced.A new thrust measuring method of spring-mass-damper system is developed.A testing stand based on the method is built up.Using the system,the thrust of a model pulse detonation engine with 50 mm inner diameter is measured,and the result is reliable.Based on analyzing of advantages and disadvantages of every method,its using region and some suggestions on thrust test stand design are put forward. |
| |
| Keywords: | pulse detonation engine thrust measurement |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
